Custom Made Gear
Largest Variety on the web
Keeping it all at low affordable pricing
Making us the one stop shop for all things - FTM
Genderqueer, Butch, Boi, Stud
We are able to adjust to your size or other requests as we make all the items
all right here under one roof in our shop
Customized to fit you just the way you want
Please check our tab "When will my discrete package ship?" for more info
We have experienced sewists to make your gear to your specifications. We also use high end professional materials, including professional grade elastic and actual Cock rings, thick and made to last, not thin Home Depot plumbing "O" rings that are inexpensive and will snap after a few uses of taking your packer in and out of the ring. If spending your hard earned dollars on products that will last is important, you've come to the right place. We set our standards high, we won't provide you items that we wouldn't use ourselves. Nothing goes out without being tested by members of the community who have given their feedback and thumbs up to the final design.
|
|
 |
|
|
|
|
|
|
|
|
|
Den Kirkwood Tucker
Owner
Boisland Enterprises, comprising of:
www.TranZwear.com
www.BulletBriefs.com
wholesale
www.TranZkids.com
www.FTMxGear.com
and now on Etsy:
Questions?
I quickly respond to all product/order related questions via email 7 days a week. If you don't get a response the same day/within 24hrs, it means I didn't get it, please send it again. Please don't attempt to hit "reply" to your confirmation receipt as it will bounce due to the receipt coming from the store/our webhost. Please send it to one of the addresses listed below. We pride ourselves on our customer service, everyone deserves speedy response time to inquiries.
TranZwear@gmail.com
Boisland@gmail.com |
|
|
| |
|
|
"What is a ball cage?"
A ball cage is added to a harness at the base of the C ring. It is designed to the hold the ball sac of your packer or packnplay. Most STP's made these days use the ball sac to create the area that seals against your body, so you won't need one for most STP's. However, STP's made with mass manufactured packers, that use a receptacle and tubing, can use a ball cage. The ball cage supports the silicone weight and helps take the pressure of the C ring off the base of your packer. This helps prevent the C ring from causing the packer to tear. The other thing a ball cage does is prevent your packer from spinning within the C ring and keeps it facing forward. We offer on some harnesses as well as in the DYI area, a head strap to add to the ball cage. This assists with larger packers or semi rigid or erect packers by keeping the head down. See photo below.
"What size C (O ring) ring do I need?"
A C or O ring is a cock ring that you slide the shaft of your packer/STP/Packnplay/Dildo thru on your harness. The standard size packer uses a 1.25" sized ring. Some larger packers or packnplays use a 1.50". Since we don't sell other company's dildos' or 3/1 ones on our site, with exception to Axolom, so we don't have the measurements of these products but have been told by other customers that the girth is much larger than standard packers and need anywhere from 1.50", 1.75" or 2.00" ring. It is up to you to measure your prosthetic to determine the size you will need for your gear. We sell the larger rings in the DYI area and if you need a larger one for the harness you are ordering, you can buy one from that area and we'll add it to your harness. The rings can stretch up to an inch, see photo. You should always stretch the ring to slide the shaft thru, never pull on the shaft as it will lose the battle and you can end up tearing the silicone. The ring size is measured in diameter, across, not circumference, around. (Takes you back to geometry, eh?)
The best way to measure the ring you need is to take your packer, lay it on a piece of paper. Take a pen and mark a dot close to each side at the bottom of the base next to the balls. This is where the ring will sit on your packer. Remove the packer, and measure between the dots. This is the largest size you will need, if you want it a bit loose, order that size, if you want it a bit snug (not too much) order a quarter inch smaller. Remembering that too tight can cause the silicone to tear. We are not responsible for your prosthetic tearing; this is a result of both too tight C ring and/or misuse of taking it in and out of the C ring.
You can order the larger C rings HERE
  
Head strap Ball cage Stretching C ring
|
|
|
|
|
|
|
